It is important to have dependable home security in the connected world of today. Simplisafe provides high-quality do-it-yourself home security systems that are easy to set up and use. The Simplisafe camera may experience connectivity problems, though, like any other Wi-Fi-dependent gadget, particularly in bigger houses where the signal isn’t strong everywhere. Here’s where a WiFi extender may make all the difference.
To solve connectivity issues, keep your Simplisafe camera from going down, and guarantee constant monitoring coverage, we’ll show you how to connect simplisafe camera to wifi extender in this blog. In order to properly manage your camera settings, we’ll also go over typical troubleshooting techniques, such as how to log in to Simplisafe.
Why A Wifi Extender Could Be Necessary For Simplisafe
Wi-Fi is necessary for Simplisafe cameras to deliver warnings, record video, and stay connected to the monitoring system. You may encounter the following if your camera is placed too far from your primary router or in a location where signal interference occurs, such as a garage, basement, or outdoor space:
- Missed or delayed alerts
- Video feeds that are pixelated or lag
- The infamous “Simplisafe camera offline” notification
By strengthening your current Wi-Fi signal, a WiFi repeater or extender may reach places where there is little or no coverage. You may dramatically increase performance and dependability by positioning a WiFi extender between your network and the Simplisafe camera.
How To Connect Simplisafe Camera To Wifi Extender
There are a few essential steps involved in connect simplisafe camera to wifi extender. Here’s the method:
1. Configure your WiFi Extender.
- The WiFi extender should be plugged approximately midway between your network and the Simplisafe camera’s position.
- To connect the extender to your primary Wi-Fi network, conferring to the manufacturer’s commands. This frequently entails:
- Using a browser or mobile app to connect
- When possible, use WPS (Wi-Fi Protected Setup).
- Giving the expanded network a name (HomeWiFi_EXT, for example)
- Note the password and SSID (network name) of the expanded network.
2. If your Simplisafe camera has already been installed, reset it.
You must reset your camera in order to modify the WiFi network it connects to:
- Take ten seconds or so to unplug the camera.
- Wait for the LED to flicker white or yellow after plugging it back in.
- Hold down the pairing button, which is often located on the camera’s bottom or rear, until the light blinks or a chime sounds.
- By doing this, the camera will enter pairing mode and be prepared to join a new WiFi network.
3. Connect Simplisafe camera to wifi extender.
- Launch the Simplisafe mobile app, then enter your email address and password to complete the Simplisafe login process.
- You may either press on the camera you want to change or choose “Add Camera” after tapping the “Devices” tab.
- To connect the camera to the WiFi, adhere to the on-screen directions. Select the extended WiFi network (such as HomeWiFi_EXT) when requested for a network.
- After entering the WiFi password, permit the camera to comprehend its setup.
- After connecting, the camera ought to show up on your dashboard and start using the WiFi extender to broadcast footage.
Tips for Troubleshooting
Even after connect simplisafe camera to wifi extender successfully, there may be sporadic glitches. The following are typical issues and solutions:
Issue 1: Simplisafe Camera Not Working
Your Simplisafe camera could have disconnected from the WiFi extender if it goes offline. Try:
- Restarting the camera and extender
- Bringing the extender a little bit nearer to the lens
- Making sure the primary router is sending a strong signal to the extender
- Checking the network condition via logging into the Simplisafe app
Issue 2: The Camera Is Unable To Connect To The Extended Network.
This may be because of:
- The WiFi password is incorrect.
- WiFi frequency not supported (2.4GHz is the optimal frequency for Simplesafe cameras)
- The extender is not correctly broadcasting
- If necessary, reboot the camera and start over after attempting to reconnect.
Extra Advice for a Secure Connection
- Make use of a two-band extender: The ideal networks for Simplisafe cameras are 2.4GHz ones. Make sure this band is supported and transmitted by your extender.
- Maintain firmware updates: The most recent firmware should be installed on the Simplisafe camera and the extender.
- Reduce device congestion: An excessive number of devices on one network might cause lag. Unused devices should be disconnected from your extender network.
- Strategic extender placement: To prevent signal strength interference, keep extenders away from microwaves, metal objects, and thick walls.
Logging in to Simplisafe: Controlling Your Camera from a Distance
Using the Simplisafe app or website to control your camera is simple once it’s connected:
- Visit the Login Page for Simplisafe.
- Enter your credentials to log in.
- To examine camera settings, see live feeds, or troubleshoot, go to “Devices”.
This provides you with monitoring and remote control capabilities, which are crucial for making sure everything functions as it should.
Concluding Remarks
The dependability of your home security system may be significantly increased by learning how to connect simplisafe camera to wifi extender. Adding a WiFi extender is a practical and cost-effective way to improve performance from your Simplisafe system or cope with dead zones.
FAQs
1. Can I use the same WiFi extender to connect more than one Simplisafe camera?
Indeed. As long as the WiFi extender can manage the traffic, you may connect more than one Simplisafe camera to it. To preserve video quality for all linked cameras, make sure your extender is dual-band and has a high throughput. This is because streaming video consumes a significant amount of data.
2. Will my Simplisafe camera’s video quality suffer if I use a WiFi extender?
It may. Compared to a straight router connection, a WiFi extender may result in slower speeds or some delay, even when it increases range. To reduce the loss of quality:
- Make use of a good dual-band extender.
- Validate that the extender is inside your router’s ideal range.
- Reduce the amount of traffic on the extended network.
3. When utilizing a WiFi extender with Simplisafe, do I need to adjust any settings on my primary router?
Usually not. The majority of WiFi extenders function by either broadcasting a new SSID or replicating your router’s. But be careful to:
- Only your primary router—not the extender—has DHCP enabled.
- The 2.4GHz band, which many Simplisafe devices require, is supported by the expanded network.
4. Can I use a mesh WiFi system with Simplisafe cameras instead of a conventional WiFi extender?
Indeed. Since mesh systems build a seamless network across your house, they are actually frequently more dependable than single extenders. By connecting to any mesh node that has the strongest signal, simplisafe cameras may increase their performance and range.
5. If my Simplisafe camera continues alternating between the extender and the main router, what should I do?
If the signal intensity is comparable between the two, this may occur. To fix this:
- To ensure that the camera only connects to your extender, set it to use a separate SSID.
- If band steering is supported by your router, turn it off.
- Modify the extender’s positioning such that it continuously produces a stronger signal where the camera is.